Usually, there is a lot of open space in the outdoor parking lot. If the grid electric parking lights are installed, they need to be connected to the power grid and laid wires. However, the Solar Parking Lot Lights independent design and working alone, do not have these problems, so the solar parking lights have been used more and more. Below is a brief analysis of the advantages of solar parking lights over traditional Grid LED street lights.
Since the Solar Parking Lot Lights does not need to be connected to the grid, there is a site limit for installation. It can be installed in remote islands, remote camps, rural roads and so on. In addition to these remote areas, solar street lamps can also be installed in natural disaster-prone areas, because these areas require higher safety performance, such as the Japanese government stipulated that no AC lighting can be installed on the riverside, so DC solar street lamps are a good choice.
No electricity wiring
Solar car park lighting saves time and money by not trenching to lay down traditional electric wiring. Instead, installing an anchor base pole on a concrete foundation and installing the solar power assembly and light fixture on the top of the pole gives you light in less than a day, not weeks of digging and pouring new concrete.
NO electricity bill
Because the solar street lamp is 100% powered by the sun, it is a 100% off-grid lighting system. It will not generate any electricity charges, and will not cause any pollution to nature. It is also a 100% green energy lighting system, so the solar street lamp has been well applied in some countries and regions with high electricity charges.
With solar battery technology improvement and updates, which makes solar street light quality is very stable. Moreover, according to our installation record and project engineering data, the failure rate is around 0.1%, so the maintenance cost is very low for the distributors or Solar lighting users.
End users can control the lighting modes from a remote control or mobile phone APP, They can switch ON/OFF, adjust brightness and choose lighting mode according to the weather condition and using environment. Each component working status and failure detection can be detected and monitored mobile APP.