Luxman is a professional solar street light manufacturer in china, With the rapid development of solar power generation and LED chip technology, solar LED street lighting systems have been widely used in courtyards, squares, parks, parking lots, farms, mines, urban community roads, rural roads and remote mountainous areas where electricity is scarce. With the widespread use of the solar street lamp, its daily maintenance and maintenance has become an essential work.
Inspection and maintenance of solar street lamp controller
The solar street lamp controller affects the change of lighting time and brightness of the system. Since the components of solar street lamps system have a different life, control of brightness and illumination time is primarily a lithium battery and solar street light controller, if found that street lamp lighting time is not enough, should first check the power of lithium-ion batteries, and check the solar street light controller, the controller of each manufacturer has manual, usually equipped with lights working status, thus can preliminary judgment solar street light system is in normal work.
Daily maintenance of solar panels
The solar panel is a key part of the energy supply for the solar street lighting system, so ensure the solar panel is complete, clean and good light harvesting. To prevent solar panels from being damaged by hard objects or sharp objects, it is prohibited to throw debris on the solar panels, regular cleaning inspection, the trees blocking solar panels should be timely repair.
Maintenance of solar battery
Mainly includes a is pay attention to guard against theft, 2 it is to check the charge and discharge is normal – such as solar street light system can be a reference to solar street lamps controller working condition carries on the preliminary judgment, can check the battery charge and discharge power level at the same time, strictly forbid to adjust the working state of the solar street light controller, avoid overshoot and discharge of storage battery.
Daily inspection of the solar street light source
Above all still want to prohibit hard thing and sharp thing strictly to hit a bump, check the working condition of illuminant often at the same time, once discover individual lamp bead is not bright the circumstance below should maintain in time. To avoid damage to the whole lamp.
Inspection and maintenance of solar lamp pole and accessories
It should be noted that the configuration of the installation door of the street lamp inspection must be complete, and the damaged and lost door should be repaired in time because the solar street lamp controller and related lines are installed in the interior, the short circuit and damage are easy to be caused after the rainwater enters, and the wire is easy to break, pull off and other problems due to the opening, which seriously affects the life of the solar street lamp system.